Honda Cbr1000rr Service Manual 2009
Some items in the Maintenance Schedule can be performed with basic mechanical skills and hand tools. Procedures for these items are provided in this manual. Read through all instructions before beginning installation. This document is intended for use by qualified technicians. Refer to a factory service manual for more.
With a Haynes manual, you can do it yourselffrom simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the motorcycle. We learn the best ways to do a job and that makes it quicker, easier and cheaper for you. Our books have clear instructions and hundreds of photographs that show each step.
Honda Cbr1000rr 2009 Service Manual Download
Whether you’re a beginner or a pro, you can save big with Haynes! -Step-by-step procedures -Easy-to-follow photos -Complete troubleshooting section -Valuable short cuts -Color spark plug diagnosis.
. 3567 Answers SOURCE: Needing new valves is highly unlikely.
Your bike is only 5 years old. Before doing anything else, run through a tank of premium gas. If the rattle goes away then a bit of pre-ignition was present. If the rattle is still there, take the bike to a dealer and ask them to reset the cam chain tensioner and set the valve clearances also. This may cost $150 or so.
Chances are that if the knocking is still present, you are hearing piston slap. This would require new pistons, rings and probably fresh cylinder bores.
Have the shop re-seat the valves while the top end is torn down. Ask the dealer as to cost before handing over the bike. Posted on Jul 28, 2009.